Lovense Calor might be just what you need if you’re looking to spice up your solo play or long-distance relationship. However, using a new toy can be intimidating, especially something that can be a bit complicated like this bad boy. No sweat! In this article, experienced sex toy tester Tim Larson spills all the beans about how to use it! Let’s dive right in.
- Calor can take anywhere from 5 to 20 minutes to warm up, depending on your room temperature. Important: Before inserting your penis, please check the sleeve temperature with your fingers.
- Calor has a downward arrow (Button B) and an encircled upward arrow (Button A). By holding down the circled button for three seconds, the device powers on, entering Depth Control mode.
- Press Button A (Up) and B (Down) to cycle through preset vibrations. To switch to Button Control, hold Button B for three seconds.
- Press Button A for three seconds to turn the device off.
Table Of Contents
How To Use Lovense Calor?
Using the Lovense Calor male masturbator is a relatively straightforward process (after you learned the buttons!) that can lead to a pleasurable experience. Here are the steps to follow:
1. Give Calor a thorough cleaning and connect the magnetic charger after it’s fully dry (the charger must be connected for the heating function to work). Important: Please apply lube BEFORE activating the warming function otherwise the sleeve will be too hot (keep the toy horizontal while doing so). Exclusively opt for water-based lubes to prevent any damage to the silicone sleeve.
2. Calor has two buttons: A downward arrow (Button B) and an encircled upward arrow (Button A), located near the charging port (You can see them in the image below). On the other side, there’s a user-friendly handle for adjusting the internal squeezing sensation. Additionally, protective end caps sit on both ends to safeguard the device from dust.
3. Hold Button A for three seconds to turn it on and initiate the heating mechanism (which takes about 5 to 20 minutes). The orange light on Button B will switch off when the toy is fully heated. If you want Calor to be slightly warmer, let it sit for a little longer before using it.
4. The default start mode is set to Depth Control. Use Button A to cycle through preset vibrations. One tap will cycle Up through the vibrations, and holding down button A for three seconds will switch off the toy. To switch to Button Control, hold Button B for three seconds. You can also use Button B to cycle Down through the preset vibration.
5. Experiment with different techniques to find what feels best for you. You can also use the handle to adjust the squeeze sensation of Calor manually.
6. Clean the toy with mildly heated water and gentle soap afterward. Do not submerge the toy in water. Make sure it is thoroughly dry before storage in a cool, dry place.
If you’re a bit confused about the buttons, the user manual is worth a quick read. For more detailed instructions, refer to the Lovense Calor User Manual PDF.
How to Lovense Calor with Remote App?
With the Lovense Remote App, you can control the toy with your smartphone and create a more customized experience.
Please download the Lovense Remote App and connect your Lovense Calor to your device. Once connected, you can use the app to control the toy’s vibration patterns and intensity levels. You can also adjust the vibration intensity by swiping up or down on the screen.
One of the great things about the Lovense Remote App is it allows you to create custom vibration patterns. You can experiment with different patterns and find the one that works best for you. You can also save your favorite patterns for future use.
Using Lovense Calor for Long-Distance Play
Calor can be a great addition to your love life if you’re in a long-distance relationship. To get started, make sure both partners have the Lovense Remote app installed on their phones. Once you’re logged in, you can connect the Calor to your phone via Bluetooth. From there on, you can give control of the toy to your partner and let the fun begin!
One thing to keep in mind is that the range of Bluetooth is limited, so you’ll need to be relatively close to your phone to maintain a connection. However, if you have a stable internet connection, you can use the app to control the toy from anywhere in the world.
Once you’ve set up the connection, you can use the app to control Calor, adjust the temperature, and even create custom vibration patterns. More tips on how to set up Lovense for long-distance play right there.
Sound Activated Vibrations and Music Sync
The Lovense Remote App allows you to control your Lovense Calor remotely and enhance your experience with sound-activated vibrations and music sync.
With sound-activated vibrations, you can use your phone’s microphone to activate the vibrations in response to sounds around you. This feature is perfect for those who enjoy adding an element of surprise and unpredictability to their playtime. To use this feature, simply turn on the sound-activated vibrations option in the app and adjust the sensitivity level to your liking.
The music sync feature allows you to sync Calor’s vibrations with your favorite songs, adding a new level of pleasure to your music-listening experience. To use this feature, simply select the music sync option in the app and choose a song from your phone’s music library. Calor will then vibrate in sync with the rhythm of the song. Wow!
Tim
- 16 Best Sex Toys For Men 2024, REALLY Tested! [VIDEO Reviews] - April 18, 2024
- 18 Best Automatic Male Masturbators 2024, REALLY Tested [Video] - March 22, 2024
- Bakunyu Nipple Fuck Review 2024: Best Big Boob Sex Doll? - March 20, 2024
