The most common use for a penis pump is for penis enlargement (although that is disputed). Other reasons are for treating medical conditions like premature ejaculation or erectile dysfunction. Hence it’s no surprise then that many models are available in the market today. However, they can be very expensive depending on the brand or manufacturer.
But no sweat! If you don’t have enough money to splurge on a branded penis pump, you can always make a homemade penis pump. The materials for making them are affordable and not hard to find. You probably even have most of them lying around your house. Furthermore, the instructions are clear, precise, and easy to follow.
Let’s check them out!
Table Of Contents
But Why Should I Make My Own?
Having a penis pump opens doors to many exciting possibilities that can enhance your sex life. It’s one of those toys that can serve multiple purposes. Don’t have one yet? Here are some reasons that can convince you to make your today.
1. Saves Money
One reason you should make a DIY penis pump is to save money. Why spend hundreds of dollars on something you don’t have to use every day? You can still make a safe and functional homemade version without using top-quality and high-tech materials.
2. Easy To Make
Making your penis pump won’t take days to finish. You can create one in a few minutes as long as you have all the materials you need and a guide to follow. The materials for one are readily available in your local hardware store, and you can buy them at affordable prices.
Also, you can watch tutorials or videos online on how to make a DIY penis pump. There are DIY articles with easy-to-follow instructions available on the internet, too.
3. No Embarrassment!
Adult toys are common today, and many individuals use them. However, some may be too shy or conservative to buy them. If you’re interested in owning one but don’t like others knowing about it, your best option is to make your own. Nobody will ever know about it, so you have no reason to be embarrassed!
4. You Can Try It First
As mentioned earlier, these products can be expensive. It’s normal to think twice before buying one because it’s like investing in yourself. Besides, you have no way of knowing if it will work for you or if it will be something that can satisfy your sexual needs.
By building your own, you get to feel what it’s like to use one. You can play with it, try it out, and determine if it’s something you’ll be comfortable and happy using. If it works for you, that’s the time for you to buy the real thing, and if it doesn’t, at least you didn’t waste your money.
Now, let’s check out how to make a homemade penis pump:
Note: You need to take great care when making and using your homemade penis pump. Any action you take upon the information on this website is strictly at your own risk, and we will not be liable for any losses, injuries, or damages. Learn more.
How To Make A Homemade Water Penis Pump?
Water pumps, sometimes called hydro pumps, use water pressure to help erect your penis. The primary benefit of using water is that you feel the haptic feedback dispensed by the water. This way, you have better control of your erections, reducing the risk of injury.
The major disadvantage is the price. A solid Bathmate product will set you back $150, putting them out of reach for many people. But that’s why a DIY water penis pump can help! Below are instructions on how you can make your own at home in 6 easy steps.
Materials Needed:
- Accordion mini plunger (like this one) Note: Make sure the accordion plunger you select fits your penis length-wise and girth-wise.
- Waterproof silicone sealant (like this one)
- Large kitchen sponge
- Box cutter
- Scissors
- Liquid transfer pump with tube (like this one)
Step-by-Step Guide
- Start by taking your accordion mini plunger, box cutter, waterproof sealant, and liquid transfer pump. Lay out all your materials before you start working.
- Second, you need to cut an opening on the handle of your mini plunger (the topmost part). With your box cutter, slice open a hole on the handle of your plunger big enough to fit the tube of your liquid transfer pump.
- Next, insert the tube of your liquid transfer pump inside the hole you created. Leave plenty of room inside so your penis won’t hit the tube. Using waterproof sealant – apply sealant around the edges to keep the tube secure.
- Following, start working on the inside of your accordion plunger. Measure a circle on your kitchen sponge using a marker, big enough to fit inside the base of your accordion plunger.
- Then, use the scissors to cut out the circle shape on the sponge. Afterward, you will need to cut out another smaller circle on the sponge, making it look like a donut. This smaller circle is to allow your penis to go through the pump.
- Insert the cut-out sponge inside the base of your accordion plunger. Apply waterproof sealant along the sides to keep the kitchen sponge in place.
How do I use it?
It’s pretty straightforward to use and they work great for in-the-shower or in-the-bath pumping.
To use it, step inside your shower and let the water flow from your faucet. Next, take the second tube from your liquid transfer pump and place it under the running water.
Then, place the accordion mini plunger on your penis until the base touches your groin. Hold the plunger handle and push the plunger all the way down your penis. Do this carefully so the hose won’t hit your penis.
Start hand pumping the water with the circle squeezer. After your plunger is filled with water, pull the plunger handle slightly to release the water.
You should feel a suction now. Hold it in place for 2 – 3 minutes or until you feel enough of the pressure around your penis before releasing your penis pump.
Afterward, release the suction by sticking your finger under the base of your accordion plunger. Feel free to repeat the steps until you get your desired erection size.
You can now have fun with a stronger erection. Masturbate with it or have sex with your partner.
You can read more on how to use a water penis pump in this guide.
How To Make A Homemade Vacuum Penis Pump?
A vacuum penis pump is the most common and effective model in the market for good reason. It’s an incredible tool to kickstart your erection and maintain it longer than it lasts typically. You’ll know perfectly how good a vacuum penis pump works once you start using it.
Unlike the water model, a vacuum pump removes the air from the tube to give you a firm erection. The air pressure acts as the trigger to automatically make your penis engorged. It works that easily and effectively. You can create one yourself using these five easy steps!
Materials Needed:
- Foam padding sheet (like this one)
- Cylinder transparent plastic jar (like this one or a taller one like this one) Note: Make sure the plastic jar you select fits your penis length-wise and girth-wise.
- Vinyl tube piece (like this one) Note: Only purchase this if your pressure pump doesn’t come with a tube piece. Also, make sure its size is compatible with the pressure pump.
- Drill with drill bits (like this one)
- Duct tape (like this one)
- Waterproof silicone sealant (like this one)
- Pressure pump (portable pump like this one or an automotive pump like this one)
- Drill gauge (like this one)
Step-by-Step Guide
- Start by taking your drill, tube, and a transparent plastic jar. Lay out your materials right in front of you.
- Next, uncap your plastic jar and flip it upside down with the open piece on the table or surface. Now, you will drill a hole right in the middle of the base of your clear jar.
- Take a drill bit and attach it to your drill. You can compare your tube to the drill to ensure a fit. See what size fits inside the circle of the drill gauge. Another way to measure the right drill bit is through trial and error using the tube and drill bit. Insert a drill bit similar in size to the tube’s circumference. Once you find the drill bit that’s most accurate – meaning it isn’t too loose or too tight on the tube – you may attach it to your drill.
- Next, drill a hole in the middle of your plastic jar. Blow away any plastic shavings to clean the base of the jar. Afterward, you can now insert the tube. About 1 inch of the tube will peek through the jar.
- Once in place, apply sealant around the hole to ensure the tube sticks properly. No air should seep out of the hole. Do a thorough check by ensuring no gaps around the sealant and the tube.
- Afterward, once the sealant dries up, we can move to the other end of the plastic jar. Take your foam padding sheet and cut it in half – about 2 x 2″ by the time you cut it in half. Then, wrap the foam padding around the open end of your plastic jar. Make sure you’re covering the edges well. You will have to use 2 or 3 foam padding sheets to have enough cushioning properly.
- Secure it with duct tape all around. We mean taping the foam padding inside and outside of the plastic jar. Doing so seals the padding of it firmly.
- From there, attach the other end of the plastic tube to your portable pressure pump. It should fit perfectly on the nozzle of your pressure pump.
How do I use it?
You may want to shave your pubic hair first to have a better seal against the skin. Typically, strands of hair affect the suction quality between the pump and your skin. You may find your penis pump isn’t working as well as it should – to avoid that, be hairless.
Then, you can apply some lube to your penis before placing it on your penis. Apply a generous amount of your favorite type of lube to your penis; in this case, water-based or silicone-based will work just as well.
Sit down on a chair and get comfortable. Place the pump over your penis and make sure the base touches all surfaces of your skin. Start pumping the hand pump; you will feel like your penis is tightly squeezed.
Do this for about 2-3 minutes or until you feel enough pressure around your penis before releasing your penis pump. Once you remove it, you can use a cock ring to maintain your erection.
You can now have fun with a strong erection. Masturbate with it or have sex with your partner.
How To Make One Without Tools
This last option is the quickest and most cost-efficient way to pump your penis without all the added effort. It’s more run-down than the other two options, but essentially, you’re getting the same use from it. You’re putting pressure on your penis to let the blood flow circulate much smoother. The result? A stronger erection than average.
Three things you will need:
- Accordion mini plunger
- Large kitchen sponge
- Scissors
- First things first – similar to the steps above – cut your kitchen sponge in a circle that fits inside the base of your accordion plunger. Measure the circumference of the sponge and cut it with scissors.
- Afterward, cut a smaller circle in your sponge for your penis to go through, leaving your sponge looking like a donut.
- Next, insert the circular kitchen sponge inside the base of your accordion plunger.
- You can soak the sponge with water before putting it on your penis.
- Do the same technique above, releasing the plunger a little and feeling suction on your penis. Maintain the suction for a few minutes until you have your desired erection size. Once you are happy with the size, you may release the plunger by inserting your finger from under the plunger.
You can now have fun and masturbate with your strong erection. Find pleasure in the movements or techniques you enjoy until you feel satisfied.
Why Buying Commercial Products Is Always Better
Penis pumps were created as a safe and effective alternative to medications and more invasive procedures for erectile dysfunction. The risk of side effects or complications is lower than any other erectile dysfunction treatment. Many healthcare professionals recommend using a penis pump for people struggling to maintain their erections, but its use is not limited to people with ED.
Should you consider buying a commercial product? The answer is a strong yes. Buying a penis pump is always better than making your own since it considerably lowers the risk of injuries. Most models on the market are specifically designed for durability, effectiveness, and comfort. The pressure levels are accurately measured and professionally designed to tell you at what level is safe as a vacuum limiter is attached to them.
Are There Any Risks With Going The DIY Route?
It’s fun and budget-friendly to make your homemade penis pump, but there are risks and side effects involved. You can never tell how it will affect you, especially because you’ll be experimenting to start with.
Hence, once you feel discomfort or pain, stop using it immediately. If you want to increase your penis size or for erectile dysfunction, invest in an industry-made penis pump.
Other health problems you may encounter include bursting of your blood vessels and painful ejaculation. Some men also notice the appearance of red skin spots, especially on their penis.
Maybe you’re wondering how to get permanent gains from pumping. Check out that guide to find out if it’s possible.
Warning: You’re making and using a homemade dick pump at your own risk!
Final Words
Just like with using other sex toys, DIY penis pumps don’t guarantee 100% safety. Homemade or industry-made, using them may have adverse effects on the body. Always remember to be careful and immediately stop using it once you experience something different. You know your body well, and if you see or feel something suspicious, don’t use your homemade hack anymore and start investing in the real thing.
Thanks for reading my guide on how to make a penis pump!
Rachel
PS, please check out our other DIY guides, for example, how to make a DIY dildo, DIY sex toys for men, and how to make fake cum.
Medium | Reddit
- What Is Pegging? Beginner’s Guide With Toy Recommendations - March 17, 2024
- How To Become A Sex Toy Tester | And Get Free Sex Toys! - March 11, 2024
- How to Use Sex Toys in a Wheelchair? 6 Tips From A Sexologist - February 26, 2024
