How to Clean Lovense Toys? PRO TIPS From A Sex Toy Tester!

  By

Featured imageCleaning your Lovense toys regularly protects your body from nasty germs while also prolonging their lifespan. But how do I clean them properly without ruining them? No sweat! In this comprehensive guide we walk you through the complete process.

Key Takeaways
  • Mild Soap and Warm Water are preferred for non-porous toys like Lovense. Clean before and after each use, and ensure they are fully dry before storing.
  • Boiling is effective for sterilizing silicone, stainless steel, and borosilicate glass. Do not boil toys with motors and check the manufacturer’s instructions before attempting to boil your device.
  • Sex Toy Cleaners are effective for cleaning silicone, rubber, and other materials commonly used in adult toys. Carefully follow the manufacturer’s instructions and choose a cleaner made with safe, gentle ingredients.

Understanding Your Lovense Toy

You must always start by reading the user manual. I know, we repeat this in every article but it gives you specific instructions on how to clean your toy plus other care tips. You must follow these instructions to avoid compromising the effectiveness of your Lovense sex toys.

Calor, Gush, Hush 2, and Edge 2

Clean your device before and after each use to prevent the buildup of bacteria and other harmful substances. Additionally, be sure to store your device in a safe and discreet location to prevent damage or unwanted attention.

Some devices like the Lovense Max 2 (image below) require specific cleaning instructions. When cleaning the Max 2, make sure the Air Vent Pump is closed off. Closing the air cap keeps the water out of the internal electronics.

Lovense Max 2

Disassemble the gadget completely and wash it (including the inner sleeve) with mildly heated water (no soap) before reassembling it. Like any other device, make sure everything is completely dry. You can also put a silica gel pack with your toys to absorb moisture.

If you plan to buy this male masturbator or if you already have this bad boy, we recommend reading our step-by-step process on how to clean Lovense Max 2.

 

How to Clean Lovense Products?

1. Using Mild Soap and Warm Water

One of the easiest ways is using mild soap and warm water. This method is best for non-porous toys (like the silicone-made Lovene Lush 3 in the image below) as they are less likely to retain bacteria. Here are the complete steps how to do it properly:

  1. Remove the device from any electronic components, such as the battery or charging port.
  2. Wash it under warm water to remove any bodily fluids or lubricants.
  3. Apply a small amount of mild soap to a cloth or your hands and lather it up.
  4. Gently rub them with the soapy cloth or your hands, making sure to clean all the crevices and textured areas like a sleeve.
  5. Rinse thoroughly with warm water, making sure to remove all the soap residue.
  6. Pat dry the with a clean, lint-free towel or let it air dry completely.

Lovense Lush 3 laying on a bathtub

Your Lovense device must be completely dry before storing it away. Moisture can lead to mold or mildew growth, which can damage the device and cause problems later on.

 

2. Quick Wipe Down

The quickest way is by wiping them down with a damp cloth, baby wipe, or towel. Make sure that your device is turned off and unplugged. Then, use a lint-free cloth or towel to wipe down the surface. You can use warm water or mild soap but avoid getting any water or soap inside your device.

If your device has any crevices or hard-to-reach areas (like Max 2’s sleeve in the image below), you can use a soft-bristled brush or toothbrush to gently scrub those areas. Be sure to wash it thoroughly with water and dry it off completely before storing it.

Sleeve from Lovense Max 2

Note that this method doesn’t fully sterilize the surface. If you’re sharing toys with someone who has an STI or if you have an STI, you must use a stronger cleaning method or consider replacing the device altogether.

 

3. Boiling Water

Boiling is a simple and effective way to sterilize Lovense toys as it can kill bacteria and germs that may be present on the surface of your device. However, we only recommend doing so with stainless steel, borosilicate glass, and silicone models without a motor (like the Kraken sleeves or the sex machine dildos). Here are the steps you can follow:

  1. Fill a pot with enough water to completely submerge it.
  2. Bring the hot water to a boil.
  3. Once the water is boiling, carefully place it in the pot.
  4. Let it boil for 1-3 minutes.
  5. Use tongs or a slotted spoon to remove it from the pot.
  6. Place the device on a clean towel or paper towel to dry.

A man thinking what masturbator to use

It’s important to not boil toys with motors or other electronic components. Doing so can damage the device and make it unusable. Be sure to check the manufacturer’s instructions before attempting to boil your toy.

Additionally, boiling may not be suitable for porous materials (such as the Max 2 sleeve) as they can absorb water and become damaged. Instead, consider using a cleaner or soap and water to clean these types of toys.

Finally, boiling isn’t something you can do daily. It’s better to do it once or twice a year if you want to give yours a thorough cleaning.

 

4. Sex Toy Cleaner

Using toy cleaners is one of the most effective ways to keep your dirty adult devices clean and hygienic. These cleaners are specifically formulated to clean sex toys and are usually made with ingredients that are safe for use.

  1. Remove the battery and any other removable parts.
  2. Apply a small amount of cleaner to a clean cloth or directly onto the device.
  3. Use the cloth to wipe it down, paying special attention to any textured areas or crevices like an inner sleeve.
  4. Rinse it thoroughly with warm water to remove any remaining cleaner.
  5. Dry it with a clean, dry cloth, or let it air dry completely before reassembling.

Cleaning Sex Toys In The Sink

Note that some contain harsh chemicals that can damage your toys or cause skin irritation. Always buy a cleaner made for adult toys with safe, gentle ingredients.

 

Other Maintenance and Care Tips

Proper Storage

After cleaning, it’s essential to store it safely to ensure its longevity. Make sure it’s completely dry and store it in a moisture-free space, away from direct sunlight and large temperature fluctuations. We also recommend not storing them in airtight containers or plastic bags as this can cause moisture buildup (You don’t want that!)

Under the Bed Bins and Boxes

Charging Your Lovense Toy

Proper charging is essential for the performance and longevity of your Lovense toy. Always use the charging cable provided by the manufacturer and ensure the charging port is dry before plugging it in. You should also avoid overcharging as this can damage the battery. I also recommend charging your device at least once every six months, even if you don’t use it frequently.

The device charging

Related: How to Charge Lovense Toys?

Tim

Tim Larson
Latest posts by Tim Larson (see all)
Bookmark the permalink.

Comments are closed.